Gone are the days of dull beige PC cases! Nowadays, everybody is getting fancy new cases with LED lights, transparent side panels, super quiet fans and much more.
These PC window applique sticker is designed to be placed on a clear side panel case window and breaks up an otherwise dull view!
It comes in many unique and attractive designs and will brighten up even the dullest of PC's!
Product Features
1. Remove your case window, figure out where to place the etching, once the correct spot determined, flip the window over to the other side.
2. Clean the window completely using soap and water or Lucite Cleaner then dry it, spray a fine mist of water over the window surface.
3. Peal the opaque backing off the translucent backing, make sure the appliqué stays on the translucent backing.
4. Apply the appliqué to the window carefully, use a masking tape as a helpful guideline to position it properly, the appliqué shall face inside the PC case.
5. Remove translucent backing from the appliqué.
6. Squeeze out any trapped air bubbles with a plastic card, after 24 hours, if still some, using a needle, poke a hole in the middle of each air bubble and squeeze out again. The etched effect improves as the adhesive dries.
